How to Read a Forklift Propane or LP Bottle Gauge
Forklift drivers should know certain safety considerations when figuring out how to read a forklift propane bottle gauge. Drivers should know when the forklift is running low on propane or fuel. Some kinds of forklifts which are older are designed so that the forks lower slowly to the ground and the machine shuts off automatically when the vehicle is out of fuel. This is very not sage and could lead to product damage and personal injury. Newer kinds of forklifts are designed differently to avoid this from occurring. The operator can utilize a handle which stops the forks from falling when the propane runs out.
1 Make sure you know where the propane gauge is located. Forklift propane gauge are a lot like a car's gas gauge. It is a small round object situated either on the valve on the propane tank or on the forklift dash where the rest of the gauges and controls are situated.
2 Always keep the gauge cover clean so that the lines and letters behind the glass are legible.
3 Look for the indicator needle at the bottom of the gauge. This needle will show you how much fuel is still inside the propane tank.
4 On the gauge: E represents empty and F represents full. When the needle arm touches the letter E, it means that the propane tank is totally empty. When the needle arm arrives at the letter F, it would mean that the propane tank is completely full.
5 In the middle of the gauge, there is a line. When the needle points at the halfway line it would mean the tank is half full of propane.
6 Also there are smaller lines midway between the halfway lines. These lines mean quarters. When the needle touches the quarter mark nearest the F, it will mean that there is three-fourths of a tank remaining. When the needle points at the quarter mark nearest E, the tank is a quarter full.